Simple Green sweater

When I saw this fabric I knew I had to have it.  I find it really hard in winter to find fabrics that are bright and colourful but also warm and snuggly.  This is both.  Its a knit fabric with a fleece backing - so plenty or warmth and snuggliness, plus look at that colour - so bright and cheerful!

I only bought 1 yard of this fabric as I knew it was going to be a shirt of some sort. I decided to go back to an old pattern.  Simplicity 5133 that I stole from Mums pattern stash quite some time ago.  I made a shirt from it back in 2015 and its starting to get  a bit old and worn out so I thought this would be just the fabric to replace it.

Again I made view 2 with long sleeves and a V neck.  Its a straight size 14 with no modifications.

I finished off the bottom and sleeves with a cuff simply because it's the easiest finish for knit fabrics.  Each of the cuffs is sewn to the front and then turned under and stitched in the ditch for a nice neat finish inside.

A few minor fit issues around the bust but nothing big enough to worry about.

I really like this shirt and have worn it quite a lot....and It goes perfectly with my peacock jeans allowing those pockets to be shown off.

Red Roses Active wear

Back on the activewear making.

This make was all about the fabric again.  I found this fabric at Sewfisticated Fabrics and couldn't resist it.  It's a medium weight scuba knit fabric in white with a printed design of huge red and pink roses all over.  I knew I wanted to make leggings out of it, but knew that I'd have no tops to wear with it so bought this pink with red dots poly lycra fabric to make a shirt to go with it.

I started with the pants pattern I was working on last time and put the three pattern pieces back together so I now had a pattern with just a single seam up the inseam and the gusset.  I added a little extra width at each seam line so that the pattern isn't quite so tight,  I then extended the length down to the ankles.

This was a quick sew using the serger and sewing with a scant 1/4" seam allowance for extra width. They fit beautifully from the knee up, but there is a bit of extra fabric around the knee that I can't quite get rid of without an outside seam.  For the time being I will live with them as is.  The top of the pants are finished with 1.5"wide elastic turned under once.

Then I wanted to make a top to go with these leggings.  Again I wanted it to incorporate my crop top bra and I wanted it to showcase the roses fabric to tie it into the pants.

I decided I wanted to try and combine my crop top pattern with the raglan sleeve shirt pattern, but then make it a tank top.  The first thing to do was to modify the back of the crop top pattern to include a rounded strap like the front.

I would then hang the rest of the shirt from these seam lines at front and back.  I basted the  crop top together and cut out the polka dot fabric and pinned it in place matching the two fabrics around the arm holes and cutting it off at the top at the curve from the strap.  I thought I had it all beautifully matched but when I put it all together I ended up with some pulling around the sides at the top.  It's fine if you pull it down firmly as it's shown here, but it has a tendency to ride back up as you're working out.

I finished off the armholes with a binding of the polka dot fabric and the bottom of the crop top with a piece of 1.5" wide elastic.

Whilst I had the legging pattern out I decided I wanted to make a few pairs of leggings to wear under dresses this winter.  I started with a medium weight sweater knit in a blue and black geometric pattern.

I wanted to try and remove that extra fabric around the outside of the knee so I took my pattern and added a outer side seam,  I then took a dart at each outer knee pattern piece based on the excess fabric I pinned out of my roses leggings.  I then tried to remove the inner seam and replace it with one going diagonally from knee to outer seam and whilst this worked OK on paper when I cut it out and basted it together it really didn't fit well fro the knee down.  Luckily I had just enough material to re-cut it with the standard inner and outer seams, though I did have to piece the new front sections at the knee but I like the way they fit better now.

I finished off these with 1.5" wide white elastic and this time did not turn it under for a really high rise legging.

Finally I wanted to make a really snuggly pair of leggings so I grabbed some beautifully fabric that I found.  Its a knit fabric backed by a fleece and feels so snuggly inside.  I bought this in both a bright green and a grey.  I used the grey for the leggings.  I cut this with both the inner and outer seams and like the way this fits.

I have an observation that I want to put here so I can remember for next time.   Using this pattern in a fabric with 4 way stretch remove 1" from the top of the front pattern piece tapering to nothing at the side seams.  If using a fabric with only 2 way stretch make sure you have that extra 1"at the front and also add 1"to the top of the back pattern piece across to the side pattern piece and tapering to the existing point in the front.  Also add 1" to the length of the legs - as seen in te photos this second pair ended up quite short - I may go back and add a cuff to them later.

Gold Keilo

This dress was actually made quite a while ago but I realised that I never blogged it.

This was a pretty simple make - its the fabric that makes it special.  When I saw this fabric in the store I knew I had to have it and bought a couple of yards.  I then decided to use that yardage to make a Christmas present for my sister last year so went back and bought another couple of yards for myself.  It's a poly lycra with a metallic gold painted over the top.

For a pattern I went back to my self drafted Keilo dress pattern.  I  went and bought the actual Keilo pattern from Named patterns so that I could make it as a present for my sister but I was too lazy to print it out and compare it to my version I just went with what I knew already works.  For this version I did do the split up the back however I didn't add a seam all the way up the back, just cut a slit and added a facing around the slit.

There is just one slight issue with this dress - because the fabric has more stretch than I had used on my original I have to tie it very tightly to get it to look Ok.

But seriously look at this fabric.

Sirrocco Jumpsuit into dress modification

I have a beautiful piece of fabric sitting in my stash at the moment that I really want to make into a beautiful dress, my problem is figuring out what pattern to use. I have a vision in my head of this fabric made up into a long sleeve maxi dress with long sleeves but I'm just not sure how it's going to work so I thought I'd start with a muslin.

First up was figuring out the top pattern.  I quite like the wrap top of the Sirrocco Jumpsuit.  I made some modifications to the pattern last time I made it, but when I pulled out my pattern pieces this time they were not the ones I remembered - I think I may have thrown out the latest version of the pattern and kept one of the old ones.  So I decided to start again with the pattern.  I cut out the pattern at a size 40 based on my upper bust measurement, then had to do a very large full bust adjustment.  3.5" on each side (for a total of 7" added for my full bust measurement).

In doing this adjustment I ended up with one really huge bust dart and another big dart in the side seam that I just could not get to sit nicely when I tried to sew them up, so instead I decided to move the side dart up into the armhole and make it into a princess seam, instead.

The next step was to make the sleeve into a long sleeve - this was as simple as taking the short sleeve and extending the length down and tapering it in to get the wrist diameter I wanted.

Finally, I had taken about 2" out of the length of the top as I changed the darts into a princess seam, so I widened the waist band to 5" to make up for the length I took off the top pieces.

I used a piece of fleecy purple fabric in my stash to work on this muslin and realised that I could then use this to replace the purple top on my long sleeve sirocco jumpsuit.  I've never been happy with the top on that jumpsuit so this was a great way to modify it.  I decided to cut the final waistband down and keep the existing purple waistband as well as I quite liked the way it broke it up.

So I now had a top pattern I liked - onto muslin 2.  I still didn't know how the skirt portion would work to make it into a maxi skirt so I decided to do a second muslin.  This time I used a beautiful red sweater knit fabric that I bought recently. 

The top worked nicely with my pattern modifications

Then I had to figure out the skirt.  I tried a number of different options.  First a gathered skirt - Not a good look.  Then I tried some box pleats - these were better but I still didn't like the final look, so for the next option I decided to try a half circle skirt.  Unfortunately due to the width of the fabric I could only make it knee length, but I definitely liked that look a lot more and ended up finishing the dress with this skirt.  Not quite the maxi dress I originally envisioned but I do like it  - and so does my daughter - she keeps stealing it off me.  I'd be more than happy to hand it over to her - but the top half does not fit her yet (thankfully)

As you may be able to see in the pictures I never actually finished the bottom of this dress.  I left it to hang so that I could straighten out the hem once it dropped, but I've never gotten around to finishing it.  Oh well - I just keep wearing it anyway.  Maybe one day I'll go back and straighten out the hem....maybe....


And that still leaves me with the question of what to do with my good fabric. Do I make another short dress? I do love the way this dress looks but I'm often stopped from wearing it cause of having to wear leggings with it in the cold....I hate leggings! 

So do I try for a paneled long skirt with the wrap top, or something totally different like the kielo wrap dress?

New Active Wear

It's been about 2 years now since I've done exercise for any solid length of time.  I've tried getting back into running a couple of times and whilst it felt good at the time it never seemed to last more than 2 weeks or so.  I cancelled my gym membership a while ago as I just wasn't feeling it and I just didn't know what I wanted to do.

Then, whilst looking up activities for my kids to do I found a local ninja warrior gym which offered beginner adult classes and decided I was just going to go for it.

I went to my first session 3 weeks ago and I love it!  I've managed to get up the 10 foot warped wall and whilst my upper body strength is still really lacking I can feel it getting a bit better.

But the main problem that I have is what to wear.  Most of my good workout clothes were bought when I was actually working out and smaller than I am now....so obviously it was time to get onto making again.

I've attempted to make active wear a couple of times in the past.  I've made a couple of plain cotton T-shirts that are just so blah that I couldn't bring myself to blog them.  One really great T-shirt in a cityscape fabric that I love

And a pair of knee length leggings with gusset that are a smidge too small but now I wanted to try and get a couple of patterns that would really work.

I started with leggings.  After researching leggings patterns I found Jalie's Clara leggings.  I really liked the idea of no front seam and so I started drafting.  I created a pattern that had a no front seam, no outer seam, a large gusset and a wide waistband.  It took quite a few iterations to get all the pieces sitting correctly and it's still not perfect but it's pretty good.

I made this pair of leggings out of a piece of navy blue, heavy weight jersey I had in my stash.  I only had 1 yard of this material and I used just about all of it - especially after having to recut the gusset at least 3 times.  I had a lot of other plans for these pants  a double layer waistband with a pocket in the back -  but in the end I decided to take a few shortcuts so I could get them finished and try them out.  I kept the waistband single layer and just serged a piece of 1.5"wide elastic to the top of the waistband and turned it to the inside.

After wearing these once I realised that the gusset didn't sit quite right - it needed to be stretched a little further.  The waistband wasn't quite tight enough so they still fell down a bit.  There is also a bit of extra length along where the outside seam should be, which results in some wrinkles under the bum.  But otherwise they were not bad.

For my second attempt I wanted to use a piece of active wear fabric in black with a diamond pattern on it that I had in stash but I had forgotten that I had already used a lot of it and there wasn't a full yard left so instead I decided to modify the pattern to include a contrasting strip down the outside of the leg.  I first modified the gusset placement extending it further down the inseam so it's a bit more stretched.  I then cut along the outside seam and used the slash and overlap technique to take about 3/4"out of the length of the outer seam at about crotch level.  I then took 2"off  of both the back and front pieces to create a 4"wide strip down the outside of the leg.

I cut the front and back pieces out of the black diamond pattern fabric.  I had to add a yoke on the back due to fabric limitations. I then used some heavy weight purple active wear fabric for the side strips.  I managed to eek the waistband out of the black fabric scraps.  I added pockets into the side stripes by cutting a second layer of the strip and a pocket bag out of lightweight spandex fabric.  I cut off the top layer at the height of the pocket opening and sewed on the pocket bag then cut the bottom layer off at the bottom of the pocket bag.  The resulting three layer piece was then inserted into the side seams together.

 Somehow - due to the stretch of the fabrics - these pants ended up really tight.  I also cut less height off the waistband on these and cut the top elastic tight so these actually stay where they are supposed it - even if they are very hard to get on.

For both these pair of pants, once I was happy with each seam I ran it through the overlocker (serger) then top stitched it down with a zig zag stitch.

Now that I was sort of happy with my pants pattern  - Though I think I still need one ore iteratino before its perfect....I decided to turn to the top half.  I really liked the look of the Jalie Pika top and wanted to try my hand at a top that worked as a crop top as well as normal tank top.

I started with my latest bra pattern.  The back is exactly the same but I extended the straps up about an inch. 

For the front I decided to get rid of the bridge and added that onto the two bra cup pieces, the final modification was to create the rounded front strap. I  cut a trial pattern out of the purple activewear fabric I used on the pants, basted it all together and loved it.  It was the perfect crop top.

I was however hoping I could get away with wearing it without any bra underneath it. To try ang give it the support it would need I used my original bra pattern from last year to create a new woven cotton bra and basted it underneath the crop top, but try as I might I couldn't get them to sit nicely so after an afternoon of trying to get it to work I gave up and just made the top as a crop top to go over another bra. I finished the neckline and arm holes with 3/8 wide elastic basted on the inside and then turned under and top stitched.  The bottom was finished with 1.5"wide elastic.

Now that I was happy with the crop top portion I wanted to try and make it into a top.   

 I used the same purple fabric for the basis of the crop top then cut a second layer out of a light weight teal poly/lycra fabric as a lining.  After basting it together I cut a front and back tank piece out of the teal fabric.  This was pretty much a draping exercise.  I cut two rectangles and then trimmed them down to the shape I wanted front and back.   I attached the front teal piece between the rounded strap  and bra cups .

And the back piece at a single point at the back V. Once I was happy I took it apart to make a pattern out of then sewed it all back together finishing the edges by simply turning it twice and stitching using a zig zag stitch.  The biggest issue was getting the gathering right at the center front.  I'm not totally happy with it but it's as good as I could get it.

The final piece was to add a 5"wide band of the heavyweight purple to the bottom of the crop top and a folded 2.5" band to the bottom of the teal.

After wearing it once I've found that the lower band needs to be longer - at the length it is now it just rolls up and is annoying.  Other than that this top works great.  I probably still need at least one more top and I'd like to try one more time on the pants but this is a good start.

Paneled jumpsuit

I bought this fabric on a whim.  It was on the $1.99/yard table and I loved the bright colours and paisley patterns. The fabric is a panel print with each panel being a rectangle approximately 23"wide x 29"long surrounded in black.  The fabric itself is a relatively thin poly lycra fabric.

When I bought the fabric I had no idea what I was going to do with it!  However if I've learned one this this year it's that I actually really like wearing jumpsuits so I decided that I should make another. 

I already have three Sirrocco jumpsuits in high rotation in my wardrobe so this time I went back to the Sallie jumpsuit as I wanted something a bit more flowy.  I originally made this pattern back in May 2016.

As you can see in these photos I needed a bit more length in the pattern  so I went back and modified it by adding a wide waistband in a different colour.  Better! 

For my latest version I included this waistband from the start this time.  I cut the top out of the center of one of the panels and the back out of another.  The waistband I cut out of the black between the panels.  For the pants I laid out my pattern pieces out one at a time so that the top of the pants was at the top of one of the panels and the black border hit at about the calf level with another couple of inches of a second panel at the bottom of the leg.  I was then able to get the lining for the top out of what was left over so at least on the outside everything is balanced and symmetrical.

The black stripe around the leg is different but I don't mind it too much.

I used all the exact same pattern modificaions as I did last time cutting a straight size 16 with 1" taken out of the rise and 1"off the length, but then took a little more off the length as I didn't want the big hem this time.

This time however I found the neckline gapes a lot more than the last one and seems to be a lot lower cut - maybe I didn't get the elastic tight enough.

I think I need to do a few modifications to the pattern before I make this again.

I need to cut the top at a smaller size across the shoulder and do a full bust adjustment as I need the extra length at the front of the top.  I can then either eliminate the extra waistband or cut the length off the top pattern piece to make the waistband, cause at the moment the waistband works at the front but then disappears in the back.

Hopefully by cutting the shoulders smaller this will also raise the V in the back a little too as my new bras show underneath it as is!

Overall, whilst I love this jumpsuit it definitely has a few minor issues.  I feel like I want to try it again but we are rapidly running out of weather to wear it so I might have to wait till next year!